Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
Fixit® Paste an industrial strength adhesive used to permanently repair, bond, cast & seal most anything! Self-leveling, batter consistency is stir-able and can be spread thick or thin for a durable surface coating. Tint with pigments to create or match desired color. Great alternative to fiberglass & other casting resins. Cures to a rock hard, semi-gloss finish that can be sanded, drilled, machined or painted. Automotive & Marine applications; stands up to UV rays, impervious to water, fuels & chemicals. Tackle your toughest repair jobs!
Easy to use: Mix equal parts, add pigment if you like, apply, smooth & let cure.
Batter-like consistency
White color
Extremely adhesive
0% shrinkage
Work time 1-3 hrs, 24 hr cure
Hard & Durable
Waterproof
Exterior Quality
Freeze-thaw stable
Non-conductive
Non-flammable
Safe to Use with potable water
Sulfur Free
Adheres to: Itself (in any stage of set-up before or after curing), other epoxies, metals, wood, most plastics, PVC, ceramic, fiber glass, concrete & more.
If paste is firm or to make thinner, gently heat [Part A] container in hot (not boiling) water for 10 minutes CAUTION: Paste will be HOT & STICKY! Allow product to cool before mixing with [Part B]. Heat accelerates working time.
Measure equal parts of A & B.
Using a craft stick & disposable surface/cup, mix vigorously 2 minutes until thoroughly combined. Incomplete mixing will give poor results. Working time 1-3 hrs. Optional: mixed paste may be tinted with paint or pigment. (A little pigment goes a long ways).
Apply (to a clean, debris-free surface) as desired or pour for casting. Smooth or texture with a wet brush or tool.
Clean up: Soap & Water or Aves® Finishing Solution (very helpful for smoothing, removing finger prints & cleaning up product residue before set-up). 24 hr full cure. Finish as desired. Outdoor & Marine Quality!
Wear protective gloves [e.g., nitrile or equivalent] when combining parts A and B. Wear a dust mask and safety glasses when sanding cured product…[P280] Keep out of reach of children…[P102] Safe for adults when used as directed. 24 hr full cure is required for hard finishing purposes such as sanding, carving, drilling, machining, etc. Keep containers sealed when not in use.
WARNING – May cause an allergic skin reaction and eye irritation. Hazard Statements – H317 May cause an allergic skin reaction. H320 Causes eye irritation.
Conforms to Safety Standard ASTM International D4236.
Fixit® Paste an industrial strength adhesive used to permanently repair, bond, cast & seal most anything! Self-leveling, batter consistency is stir-able and can be spread thick or thin for a durable surface coating. Tint with pigments to create or match desired color. Great alternative to fiberglass & other casting resins. Cures to a rock hard, semi-gloss finish that can be sanded, drilled, machined or painted. Automotive & Marine applications; stands up to UV rays, impervious to water, fuels & chemicals. Tackle your toughest repair jobs!
Easy to use: Mix equal parts, add pigment if you like, apply, smooth & let cure.
Batter-like consistency
White color
Extremely adhesive
0% shrinkage
Work time 1-3 hrs, 24 hr cure
Hard & Durable
Waterproof
Exterior Quality
Freeze-thaw stable
Non-conductive
Non-flammable
Safe to Use with potable water
Sulfur Free
Adheres to: Itself (in any stage of set-up before or after curing), other epoxies, metals, wood, most plastics, PVC, ceramic, fiber glass, concrete & more.
If paste is firm or to make thinner, gently heat [Part A] container in hot (not boiling) water for 10 minutes CAUTION: Paste will be HOT & STICKY! Allow product to cool before mixing with [Part B]. Heat accelerates working time.
Measure equal parts of A & B.
Using a craft stick & disposable surface/cup, mix vigorously 2 minutes until thoroughly combined. Incomplete mixing will give poor results. Working time 1-3 hrs. Optional: mixed paste may be tinted with paint or pigment. (A little pigment goes a long ways).
Apply (to a clean, debris-free surface) as desired or pour for casting. Smooth or texture with a wet brush or tool.
Clean up: Soap & Water or Aves® Finishing Solution (very helpful for smoothing, removing finger prints & cleaning up product residue before set-up). 24 hr full cure. Finish as desired. Outdoor & Marine Quality!
Wear protective gloves [e.g., nitrile or equivalent] when combining parts A and B. Wear a dust mask and safety glasses when sanding cured product…[P280] Keep out of reach of children…[P102] Safe for adults when used as directed. 24 hr full cure is required for hard finishing purposes such as sanding, carving, drilling, machining, etc. Keep containers sealed when not in use.
WARNING – May cause an allergic skin reaction and eye irritation. Hazard Statements – H317 May cause an allergic skin reaction. H320 Causes eye irritation.
Conforms to Safety Standard ASTM International D4236.